IKEA MATMASSIG Руководство - Страница 22

Просмотреть онлайн или скачать pdf Руководство для Варочная панель IKEA MATMASSIG. IKEA MATMASSIG 28 страниц.
Также для IKEA MATMASSIG: Руководство (24 страниц), Руководство (44 страниц), Руководство (44 страниц), Руководство (28 страниц), Руководство (48 страниц), Руководство (36 страниц), Руководство (28 страниц), Руководство (44 страниц), Руководство (29 страниц), Руководство (12 страниц), Руководство (48 страниц)

ENGLISH

If the feeding gas pressure is

different or variable from the

required one, you must install an

appropriate pressure adjuster,

which is not supplied with the

product. If needed, it must be

ordered separately from the

local After Sales Service Provider,

refer to the Guarantee chapter.

The pressure adjuster must be

fitted on gas supply pipe, in

compliance with AS/NZS

5601:2013.

The rating plate is located below the

surface of the casing.

Adjusting flame level

When you install the hob, it is necessary to

check the minimum flame setting:

1. Turn the gas tap to the maximum

position and ignite.

2. Set the gas tap to the minimum flame

position and turn the control knob from

minimum to maximum several times. If

the flame is unstable or extinguished,

follow the procedure further.

3. Re-ignite the burner and set to

minimum.

4. Remove the control knob and the

gasket.

5. To adjust, use a thin bladed screwdriver

and turn the adjustment screw until the

flame is steady and does not extinguish.

When the knob is turned from minimum

to maximum, and vice versa (see

following picture).

6. Repeat this procedure for all burners.