2M Technology 2MTHWT-HMD-II 빠른 매뉴얼 - 페이지 10

{카테고리_이름} 2M Technology 2MTHWT-HMD-II에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 2M Technology 2MTHWT-HMD-II 17 페이지. Digital detection module

FAQs

Failure/Symptom

What should I do if

some people's

temperatures

cannot be taken?

What should I do if

the temperature

measured by the

device is

inaccurate?

Solution

1. Check whether the measurement distance is proper. The

recommended measurement distance is 0.39"-1".

2. Check whether the wrist is aimed at the temperature

measurement point.

3. Check whether the wrist is covered. The wrist cannot be

covered by sleeves, watches, bracelets, or other objects.

A person must remove such objects, and then have the

temperature taken 30seconds–1min later.

4. Check whether the body surface temperature is too low.

If a person comes from an outdoor low-temperature

environment to the measurement area, the person

needs to stay in this area for 5min before the

temperature is taken.

1. The device requires preheating after power-on. It enters

the optimal temperature measurement state 15 minutes

later.

2. Check whether the wrist is aimed at the temperature

measurement point.

3. Check whether the wrist is covered. The wrist cannot be

covered by sleeves, watches, bracelets, or other objects.

A person must remove such objects, and then have the

temperature taken 0.5–1min later.

4. Check whether the device is used in an environment with

low temperature, high temperature, or strong wind. If

yes, deploy the device in an indoor windless

environment with the temperature of 10°C to 45°C.

www.2MTechnology.net

Digital Detection Module - Quick Guide