Green Lighting TRI-SENSOR GL4612LU 조립 및 피팅 지침 - 페이지 2
{카테고리_이름} Green Lighting TRI-SENSOR GL4612LU에 대한 조립 및 피팅 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Green Lighting TRI-SENSOR GL4612LU 6 페이지.
페이지 인쇄SPECIFICATION
The P-lux lantern switches on automatically at dusk. The lantern will stay in a dim down mode,
when the PIR is activated the P-Lux will lux up to full brightness for 60 seconds or 60 seconds
from the last trigger. It will then return to the dim down mode, and switch off automatically at dawn.
approaching. The P-lux3 is fitted with temperature compensation to give a consistent detection
range. (6m) in all weather. For the PIR to work at its best, the PIR should be crossed,
not approached head-on. The examples below illustrate this.
The sensor is controlled by a built-in photocell so that it operates only between dusk and dawn.
Once the sensor has turned on the light, it will stay on for approximately 60 seconds.
120°
6m
NOTE: When the lantern is positioned directly facing a person walking straight towards it,
the detection range can be as little as 1.5 metres.We therefore recommend that the lantern be
positioned to the side of the entrance.
LOCATION
Choose a suitable location for installing the P-LUX lantern, that is, away from trees, hot ventilator
the ground.