CeoTronics CT-DECT Base 사용 설명서 - 페이지 8
{카테고리_이름} CeoTronics CT-DECT Base에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CeoTronics CT-DECT Base 20 페이지. Headset for wireless duplex communication
CeoTronics CT-DECT Base에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지), 사용 설명서 (20 페이지), 사용 설명서 (14 페이지), 사용 설명서 (14 페이지)
페이지 인쇄2.2
Technical description
Figure 2 radio CT-DECT Multi (PP)
1
Fall protection cord
2
6-pole jack for a CT communication set
3
On/off switch and volume control (rotary knob). The unit is switched off if the rotary knob is set
fully counter-clockwise (position »
the communication set.
4
Bank of 5 pushbuttons.
- Three center buttons »COM ON/OFF«: shortly pressing any of these three buttons activates
the aircraft intercom connection with the crew aboard (you hear a high double beep in your
CT headset) if previously it was switched-off or deactivates it (you hear a low double beep
in your CT headset) if previously it was switched-on.
Only the user establishing the intercom connection is connected through to the aircraft.
- All five pushbuttons can be used for subscription of the CT-DECT Multi (PP) to the base
device (FP) for example a CT-DECT Case
5
Removable cover for the battery compartment
6
Control lamp, batteries
green illuminates constant
green flashes
red flashes
LED OFF
«). The volume control is used to adjust the volume for
UB > 3,55V
3,4V < UB ≤ 3,55V
UB ≤ 3,4V, approx. 30 minutes operating time
UB ≤ 2,8V, no function
8