CeoTronics CT-DECT Base Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Transceiver CeoTronics CT-DECT Base. CeoTronics CT-DECT Base 20 stron. Headset for wireless duplex communication
Również dla CeoTronics CT-DECT Base: Instrukcja obsługi (20 strony), Instrukcja obsługi (20 strony), Instrukcja obsługi (14 strony), Instrukcja obsługi (14 strony)
Drukuj stronę2.2
Technical description
Figure 2 radio CT-DECT Multi (PP)
1
Fall protection cord
2
6-pole jack for a CT communication set
3
On/off switch and volume control (rotary knob). The unit is switched off if the rotary knob is set
fully counter-clockwise (position »
the communication set.
4
Bank of 5 pushbuttons.
- Three center buttons »COM ON/OFF«: shortly pressing any of these three buttons activates
the aircraft intercom connection with the crew aboard (you hear a high double beep in your
CT headset) if previously it was switched-off or deactivates it (you hear a low double beep
in your CT headset) if previously it was switched-on.
Only the user establishing the intercom connection is connected through to the aircraft.
- All five pushbuttons can be used for subscription of the CT-DECT Multi (PP) to the base
device (FP) for example a CT-DECT Case
5
Removable cover for the battery compartment
6
Control lamp, batteries
green illuminates constant
green flashes
red flashes
LED OFF
«). The volume control is used to adjust the volume for
UB > 3,55V
3,4V < UB ≤ 3,55V
UB ≤ 3,4V, approx. 30 minutes operating time
UB ≤ 2,8V, no function
8