KitchenAid WCG Series 프로판 전환 지침 - 페이지 10

{카테고리_이름} KitchenAid WCG Series에 대한 프로판 전환 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid WCG Series 20 페이지. Lp gas

5. For LP gas conversion:

Completely tighten screw "A" to set the minimum flame

height.

For Natural gas conversion:

Tighten screw "A" to reduce flame height. Loosen screw to

increase flame height. See "Complete Burner Adjustment"

section.

A. Inner crown adjustment screw

B. Outer crown adjustment screw

6. Replace the control knob.

To Adjust Outer Crown Flame:

1. Set the outer crown flame to LO.

2. Remove the control knob.

3. For LP gas conversion:

Completely tighten screw "B" to set the minimum flame

height.

For Natural gas conversion:

Tighten screw "B" to reduce flame height. Loosen screw to

increase flame height. See "Complete Burner Adjustment"

section.

4. Replace the gray shield. Use a screwdriver to help push the

shield into place.

5. Replace the black rubber grommet.

6. Replace the control knob.

7. Test the flame by turning the control from LO to HI, checking

the flame at each setting.

Complete Burner Adjustment

1. Check burner flame(s) for a proper size and shape. The

cooktop low burner flame should be a steady blue flame

approximately ¹⁄₄" (0.64 cm) high.

A. Low flame

B. High flame

2. Completely fill out the conversion label and attach label to

bottom of the cooktop next to the rating tag. Do not cover the

rating tag with the conversion label.

IMPORTANT: Place gas orifice spuds in plastic parts bag for

future use and keep with package containing literature.

Read "Sealed Surface Burners" section in the Use and Care

Guide supplied with your cooktop.