Ganz ZC-Y20PH 사용 설명서 - 페이지 12

{카테고리_이름} Ganz ZC-Y20PH에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ganz ZC-Y20PH 20 페이지. Colour cs mount camera

페이지 인쇄

■ Automatic Gain Control (AGC) and Sensitivity Level Settings

● AGC/sensitivity level setting screen 1

An AGC level can be automatically changed, maintained constant or set for OFF. This screen also permits a

sensitivity level to be changed in increments of OFF, 2 times, 4 times, 6 times, 8 times, 10 times, 16 times, 24

times or 32 times.

Move the flashing [→] cursor using the ▲ key and the ▼

key to select the desired AGC mode of "AUTO," "FIX" or

"OFF," then press the SET key to register the setting.

When "AUTO" or "OFF" is selected, the AGC/sensitivity

level setting screen 3 (on the next page) is displayed.

When "FIX" is selected, the AGC/sensitivity level setting

screen 2 is displayed.

Note

When the AGC switch is placed in the OFF position,

the mode is set for OFF.

● AGC/sensitivity level setting screen 2

This screen appears and the [＊] cursor in the AGC level

(dB) indication flashes if "FIX" is selected and the setting

is registered. Vary the level by moving the [＊] cursor

using the ▲ key and the ▼ key. Pressing the SET key

for registration will advance the display to the

AGC/sensitivity level setting screen 3 "SENS UP."

● AGC/sensitivity level setting screen 3

Move the flashing [→] cursor using the ▲ key and the ▼

key to select the desired incremental parameter and

press the SET key to register the setting. The display will

then return to the initial screen.

Note

When the AGC switch is placed in the OFF position,

the mode is set for OFF.

ＡＧＣ →ＡＵＴＯ

ＦＩＸ

ＯＦＦ

ＡＧＣＡＵＴＯ

→ＦＩＸ

ＯＦＦ

０５１０１５１８

ーーーーー＋＊ーーー＋ーーーー＋ーーー

ＳＥＮＳＵＰ →ＯＦＦ

Ｘ２

Ｘ４

Ｘ６

Ｘ８

Ｘ１０

Ｘ１６

Ｘ２４

Ｘ３２

（ｄＢ）