Green Point igh 사용자 설명서 - 페이지 7

{카테고리_이름} Green Point igh에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Green Point igh 12 페이지.

Mounting

Select a mounting location for the Wireless

Motion Sensor. When choosing an appropriate

location, the following should be considered:

• Detection angles (refer to diagram )

• A mounting height of 1.8m is recommended

• RF range

• Shielding the motion sensor from direct

sunlight, if possible, for better motion- sensing

reliability.

• Avoiding placement of the motion sensor near

heat or cold-producing devices.

Use the installing mold included to mount the

igh

Sensor. Select a location to install the

Sensor, and with the installing mold in place,

mark the drill holes with a pencil. Drill holes in

the marked areas. Use a hammer to tap the

dowels into the holes. Place the base over the

dowels, insert the screws and tighten them to

build a base for the

then be hung on the base and adjusted to the

correct angle, using the back brackets of the

Sensor.

Please refer to the "Detection Test" to

determine the best mounting angle.

igh

Sensor. The Sensor can

igh