Green Point igh Kullanıcı Kılavuzu - Sayfa 7

Ev Otomasyonu Green Point igh için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Green Point igh 12 sayfaları.

Mounting

Select a mounting location for the Wireless

Motion Sensor. When choosing an appropriate

location, the following should be considered:

• Detection angles (refer to diagram )

• A mounting height of 1.8m is recommended

• RF range

• Shielding the motion sensor from direct

sunlight, if possible, for better motion- sensing

reliability.

• Avoiding placement of the motion sensor near

heat or cold-producing devices.

Use the installing mold included to mount the

igh

Sensor. Select a location to install the

Sensor, and with the installing mold in place,

mark the drill holes with a pencil. Drill holes in

the marked areas. Use a hammer to tap the

dowels into the holes. Place the base over the

dowels, insert the screws and tighten them to

build a base for the

then be hung on the base and adjusted to the

correct angle, using the back brackets of the

Sensor.

Please refer to the "Detection Test" to

determine the best mounting angle.

igh

Sensor. The Sensor can

igh