HIKVISION TURBO HD DS-2CE56D8T-VPIT(E) 사용자 설명서 - 페이지 4
{카테고리_이름} HIKVISION TURBO HD DS-2CE56D8T-VPIT(E)에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD DS-2CE56D8T-VPIT(E) 15 페이지. D8t series dome camera
HIKVISION TURBO HD DS-2CE56D8T-VPIT(E)에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지)
페이지 인쇄
1 Introduction
1.1 Product Features
The camera is applicable for both indoor and outdoor
conditions, and the application scenarios include road,
warehouse, underground parking lot, bar, etc.
The main features are as follows:
High performance CMOS sensor
Low illumination, 0.005 Lux @ (F 1.8, AGC ON), 0 Lux
with IR
IR cut filter with auto switch
OSD menu with configurable parameters
Auto white balance
internal synchronization
SMART IR mode
PoC (with-E)
3-axis adjustment
Note:
Type II camera is applicable to indoor conditions only.
1.2 Overview
Before you start:
The cables of device vary according to different models.
The cables of each type are shown in the figures below,
refer to the actual sample.
You can debug the camera by connecting an auxiliary
HD TVI cable to the auxiliary video output.
1.2.1 Overview of Type I Camera
Lens
Menu Button
Bubble
Figure 1-1 Overview of Type I Camera
1.2.2 Overview of Type II Camera
Lens
Menu Button
Bubble
Figure 1-2 Overview of Type II Camera
Cables
Auxiliary
Video Output
Back Box
Cables
Base Plate
Auxiliary
Video Output
Back Box
Power Cord
24 VAC/12 VDC
Model I Cables
Power Cord
12 VDC
Video Cable
Model II Cables
Power Cord
24 VAC/12 VDC
Video Cable
Model I Cables
Power Cord 12 VDC
Video Cable
Model II Cables
Video Cable