HIKVISION TURBO HD DS-2CE56H0T-ITPF 사용자 설명서 - 페이지 10

{카테고리_이름} HIKVISION TURBO HD DS-2CE56H0T-ITPF에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD DS-2CE56H0T-ITPF 16 페이지. Turret camera

Steps:

Drill four screw holes in the wall according to the

holes of the mount.

2. Install the mount to the wall by aligning the four

screw holes of the mount with expansion screws on

the wall.

3. Secure the mount with four hex nuts and washers.

4. Install the mounting base of the turret camera to

the wall mounting bracket, and secure them with

supplied screws.

Figure 2-18 Install the Mounting Base to the Bracket

5. Route the cables through the mount.

6. Repeat steps 7 to 9 of 2.1.1 Ceiling/Wall Mounting

without Junction Box to complete the installation.

2.4 Ceiling Mounting of Type III Camera

Steps:

1. Disassemble the turret camera by rotating the

camera to align the notch to one of the marks, as

shown in the figure below.

Figure 2-19 Disassemble the Camera

2. Remove the mounting base from the camera body

with a flat object, e.g., a coin.

3. Paste the drill template (supplied) to the place

where you want to install the camera.

4. Drill the screw holes and the cable hole (optional)

on the ceiling/wall according to the drill template.

Figure 2-17 Install the Mount

60 mm (2.36" )

Figure 2-20 Drill Template