HIKVISION TURBO HD DS-2CE56H0T-ITPF 사용자 설명서 - 페이지 11

{카테고리_이름} HIKVISION TURBO HD DS-2CE56H0T-ITPF에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD DS-2CE56H0T-ITPF 16 페이지. Turret camera

Note:

Drill the cable hole, when adopting the ceiling outlet

to route the cable

5. Attach the mounting base to the ceiling/wall, and

secure them with supplied screws.

Figure 2-21 Attach the Mounting Base to the Ceiling

Note:

The supplied screw package contains self-tapping



screws, and expansion bolts.

For cement wall/ceiling, expansion bolts are



required to fix the camera. For wooden wall/ceiling,

self-tapping screws are required.

6. Route the cables through the cable hole, or the side

opening.

7. Align the camera with the mounting base, and

tighten the camera on the mounting base.

Figure 2-22 Secure the Camera with Mounting Base

8. Connect the corresponding cables, such as power

cord, and video cable.

9. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

Tilt Position

[0°to 75°]

1). Hold the camera body, and rotate the enclosure

to adjust the pan position [0° to 360°].

2). Move the camera body up and down to adjust

the tilt position [0° to 75°].

3). Rotate the camera body to adjust the rotation

position [0° to 360°].

3 Menu Description

Purpose:

Call the menu by clicking the button

Control interface, or call preset No.95.

Pan Position

[0° to 360°]

Figure 2-23 3-axis Adjustment

Rotation Position

[0°to 360°]

on the PTZ