- ページ 11

防犯カメラ HIKVISION TURBO HD DS-2CE56H0T-ITPFのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION TURBO HD DS-2CE56H0T-ITPF 16 ページ。 Turret camera

Note:

Drill the cable hole, when adopting the ceiling outlet

to route the cable

5. Attach the mounting base to the ceiling/wall, and

secure them with supplied screws.

Figure 2-21 Attach the Mounting Base to the Ceiling

Note:

The supplied screw package contains self-tapping



screws, and expansion bolts.

For cement wall/ceiling, expansion bolts are



required to fix the camera. For wooden wall/ceiling,

self-tapping screws are required.

6. Route the cables through the cable hole, or the side

opening.

7. Align the camera with the mounting base, and

tighten the camera on the mounting base.

Figure 2-22 Secure the Camera with Mounting Base

8. Connect the corresponding cables, such as power

cord, and video cable.

9. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

Tilt Position

[0°to 75°]

1). Hold the camera body, and rotate the enclosure

to adjust the pan position [0° to 360°].

2). Move the camera body up and down to adjust

the tilt position [0° to 75°].

3). Rotate the camera body to adjust the rotation

position [0° to 360°].

3 Menu Description

Purpose:

Call the menu by clicking the button

Control interface, or call preset No.95.

Pan Position

[0° to 360°]

Figure 2-23 3-axis Adjustment

Rotation Position

[0°to 360°]

on the PTZ