- ページ 9

防犯カメラ HIKVISION TURBO HD DS-2CE56H0T-ITPFのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION TURBO HD DS-2CE56H0T-ITPF 16 ページ。 Turret camera

not, adjust the camera according to the figure below

to get an optimum angle.

Tilt Position

[0° to 75°]

1). Hold the camera body, and rotate the enclosure

to adjust the pan position [0° to 360°].

2). Move the camera body up and down to adjust

the tilt position [0° to 75°].

3). Rotate the camera body to adjust the rotation

position [0° to 360°].

2.3 Installation of Type I and Type II Camera

2.3.1 Ceiling/Wall Mounting with Junction Box

Steps:

1. Paste the drill template on the ceiling/wall.

2. Drill screw holes and the cable hole (optional) in the

ceiling/wall according to the holes of the drill

template.

Type I Camera

Figure 2-15 Drill Template of the Junction Box

Note:

Drill the cable hole, when adopting the ceiling

outlet to route the cable.

3. Take apart the junction box, and align the screw

holes of the turret camera's mounting base with

those on junction box's cover.

4. Fix the mounting base on junction box's cover by

supplied screws.

5. Secure the junction box's body with supplied screws

on the ceiling/wall.

6. Combine the junction box's cover with the junction

box's body.

Junction Box Body

7. Repeat steps 6 to 9 of 2.1.1 Ceiling/Wall Mounting

without Junction Box to install the camera to the

junction box.

2.3.2 Wall Mounting

Before you start:

You need to purchase a wall mount first.

Figure 2-14 3-axis Adjustment

Figure 2-16 Fix the Gang Box

Pan Position

[0° to 360°]

Rotation Position

[0° to 360°]

Junction Box Body

Junction Box Cover