- ページ 7

防犯カメラ HIKVISION TURBO HD DS-2CE56H0T-ITPFのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION TURBO HD DS-2CE56H0T-ITPF 16 ページ。 Turret camera

2.1.2 Mounting with Inclined Ceiling Mount

Steps:

1. Paste the drill template (supplied) to the place

where you want to install the camera.

2. Drill screw holes, and the cable hole on the

ceiling/wall according to the supplied drill template.

3. Disassemble the inclined ceiling mount by the screw

driver.

4. Install the turret camera's mounting base on the

inclined ceiling mount's cover with three PM4

screws.

Figure 2-7 Install Turret Camera's Mounting Base

5. Install the inclined ceiling mount's body on the

ceiling/wall with four PA4 × 25 screws, as shown in

Figure 2-8.

Figure 2-8 Fix the Inclined Base Body

6. Combine inclined ceiling mount's cover with its

body with supplied screws.

7. Repeat steps 6 to 9 of the 2.1.1 Ceiling/Wall

Mounting without Junction Box to complete the

installation.

Figure 2-9 Fix the Camera to the Inclined Base

2.2 Installation of Type II Camera

Before you start:

Both wall mounting and ceiling mounting are suitable

for the turret camera. Ceiling mounting will be taken as

an example in this section. You can take steps of ceiling

Figure 2-6 The Drill Template

Screw Hole

Cable

Hole