HIKVISION TURBO HD DS-2CE56H0T-ITPF 사용자 설명서 - 페이지 7

{카테고리_이름} HIKVISION TURBO HD DS-2CE56H0T-ITPF에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD DS-2CE56H0T-ITPF 16 페이지. Turret camera

2.1.2 Mounting with Inclined Ceiling Mount

Steps:

1. Paste the drill template (supplied) to the place

where you want to install the camera.

2. Drill screw holes, and the cable hole on the

ceiling/wall according to the supplied drill template.

3. Disassemble the inclined ceiling mount by the screw

driver.

4. Install the turret camera's mounting base on the

inclined ceiling mount's cover with three PM4

screws.

Figure 2-7 Install Turret Camera's Mounting Base

5. Install the inclined ceiling mount's body on the

ceiling/wall with four PA4 × 25 screws, as shown in

Figure 2-8.

Figure 2-8 Fix the Inclined Base Body

6. Combine inclined ceiling mount's cover with its

body with supplied screws.

7. Repeat steps 6 to 9 of the 2.1.1 Ceiling/Wall

Mounting without Junction Box to complete the

installation.

Figure 2-9 Fix the Camera to the Inclined Base

2.2 Installation of Type II Camera

Before you start:

Both wall mounting and ceiling mounting are suitable

for the turret camera. Ceiling mounting will be taken as

an example in this section. You can take steps of ceiling

Figure 2-6 The Drill Template

Screw Hole

Cable

Hole