HIKVISION TURBO HD DS-2CE56H8T-ITZF 사용자 설명서 - 페이지 9
{카테고리_이름} HIKVISION TURBO HD DS-2CE56H8T-ITZF에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD DS-2CE56H8T-ITZF 15 페이지. Turbo hd dome camera
페이지 인쇄
8. Fit the bubble back to the camera.
9. Tighten the screws on the bubble of the dome camera
to finish the installation.
2.4 Wall Mounting of Type III Camera
Before you start:
You need to purchase a wall mount first.
Steps:
1. Drill 4 screw holes in the wall according to the holes of
the mount.
2. Attach the mount to the wall by aligning the 4 screw
holes of the mount.
3. Insert supplied expansion screws in the screw holes.
4. Secure the mount with 4 hex nuts and washers.
5. Refer to step 3 of 2.3 Ceiling Mounting of Type III
Camera to remove dome camera's bubble.
6. Attach the back box of the dome camera to the wall
mount, and secure them with supplied screws.
Figure 2-14 Attach the Back Box to the Mount
7. Route the cables through the mount.
8.
steps 6 to 9 of the
Repeat
III Camera to complete the installation
Figure 2-11 Fit the Black Liner Back
Figure 2-12 Finish Installation
Figure 2-13 Install Wall Mount
Ceiling Mounting of Type
2.1
.