- ページ 9

防犯カメラ HIKVISION TURBO HD DS-2CE56H8T-ITZFのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION TURBO HD DS-2CE56H8T-ITZF 15 ページ。 Turbo hd dome camera

8. Fit the bubble back to the camera.

9. Tighten the screws on the bubble of the dome camera

to finish the installation.

2.4 Wall Mounting of Type III Camera

Before you start:

You need to purchase a wall mount first.

Steps:

1. Drill 4 screw holes in the wall according to the holes of

the mount.

2. Attach the mount to the wall by aligning the 4 screw

holes of the mount.

3. Insert supplied expansion screws in the screw holes.

4. Secure the mount with 4 hex nuts and washers.

5. Refer to step 3 of 2.3 Ceiling Mounting of Type III

Camera to remove dome camera's bubble.

6. Attach the back box of the dome camera to the wall

mount, and secure them with supplied screws.

Figure 2-14 Attach the Back Box to the Mount

7. Route the cables through the mount.

steps 6 to 9 of the

Repeat

III Camera to complete the installation

Figure 2-11 Fit the Black Liner Back

Figure 2-12 Finish Installation

Figure 2-13 Install Wall Mount

Ceiling Mounting of Type

2.1