- ページ 8

防犯カメラ HIKVISION TURBO HD DS-2CE56H8T-ITZFのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION TURBO HD DS-2CE56H8T-ITZF 15 ページ。 Turbo hd dome camera

2. Drill screw holes and the cable hole (optional) on the

ceiling according to the supplied drill template.

Note:

Drill the cable hole (hole A) when adopting the ceiling

outlet to route the cable.

3. Loosen the screws on the bubble of the dome camera

to remove the bubble.

Figure 2-8 Remove the Bubble and the Black Liner

4. Attach the back box of camera to the ceiling and

secure them with supplied screws.

Note:

The supplied screw package contains self-tapping



screws, and expansion bolts.

For cement ceiling, expansion bolts are required to



fix the camera. For wooden ceiling, self-tapping

screws are required.

5. Route the cables through the cable hole, or the side

opening.

6. Connect the corresponding cables, such as power

cord, and video cable.

7. Power on the camera to check whether the image on

the monitor is gotten from the optimum angle. If not,

adjust the camera according to the figure below to get

an optimum angle.

Figure 2-7 The Drill Template

Figure 2-9 Attach the Back Box

0° to 75°

Figure 2-10 3-Axis Adjustment

0° to 355°