- ページ 6

防犯カメラ HIKVISION TURBO HD DS-2CE56H8T-ITZFのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION TURBO HD DS-2CE56H8T-ITZF 15 ページ。 Turbo hd dome camera

Type I Camera

Note:

Drill the cable hole, when adopting the ceiling outlet

to route the cable.

3. Loosen the screws on the bubble of the dome camera

to remove the bubble and the black liner.

4. Attach the back box of type I camera/base plate of

type II camera to the ceiling and secure them with

supplied screws.

Type I Camera

Figure 2-2 Attach the Back Box/Base Plate

Note:

The supplied screw package contains self-tapping



screws, and expansion bolts.

For cement ceiling, expansion bolts are required to



fix the camera. For wooden ceiling, self-tapping

screws are required.

5. Route the cables through the cable hole, or the side

opening.

6. Secure the camera on the back box/base plate.

1) For type I camera secure the camera on the back

box by tightening the screw.

2) For type II camera secure the camera on the base

plate by rotating the camera clockwise.

Figure 2-3 Fix the camera to the Ceiling

7. Connect the corresponding cables, such as power cord

and video cable.

8. Power on the camera to check whether the image on

the monitor is gotten from the optimum angle. If not,

adjust the camera according to the figure below to get

an optimum angle.

Figure 2-1 The Drill Template

Type II Camera