- ページ 7

防犯カメラ HIKVISION TURBO HD DS-2CE56H8T-ITZFのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION TURBO HD DS-2CE56H8T-ITZF 15 ページ。 Turbo hd dome camera

Type I Camera

0° to 75°

9. Fit the black liner back to the camera and tighten the

screws on the bubble of the dome camera to finish

the installation.

2.2 Wall Mounting of Type I and Type II Camera

Before you start:

You need to purchase a wall mount first.

Steps:

1. Drill 4 screw holes in the wall according to the holes of

the mount.

2. Attach the mount to the wall by aligning the 4 screw

holes of the mount.

3. Insert supplied expansion screws in the screw holes.

4. Secure the mount with 4 hex nuts and washers.

Figure 2-5 Install Wall Mounting Mount

5. Refer to step 3 of 2.1 Ceiling Mounting of Type I and

Type II Camera to remove dome camera's bubble and

the black liner.

6. Attach the back box/base plate of the dome camera to

the wall mount and secure them with supplied screws.

Type I Camera

Figure 2-6 Attach the Base Plate to the Mount

7. Route the cables through the mount.

steps 6 to 9 of the 2.1 Ceiling Mounting of Type

Repeat

I and Type II Camera to complete the installation.

2.3 Ceiling Mounting of Type III Camera

Before you start:

Both wall mounting and ceiling mounting are suitable for

the dome camera. Ceiling mounting will be taken as an

example in this section. And you can take steps of ceiling

mounting as a reference for wall mounting.

Steps:

1. Paste the drill template to the celling.

0° to 355°

Figure 2-4 3-Axis Adjustment

Type II Camera