HIKVISION TURBO HD DS-2CE5AC5T-AVPIT3Z 사용자 설명서 - 페이지 6

{카테고리_이름} HIKVISION TURBO HD DS-2CE5AC5T-AVPIT3Z에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD DS-2CE5AC5T-AVPIT3Z 16 페이지. Dome & turret camera

페이지 인쇄

Note:

The supplied screw package contains self-tapping



screws, and expansion bolts.

For cement ceiling, expansion bolts are required to



fix the camera. For wooden ceiling, self-tapping

screws are required.

5. Route the cables through the cable hole, or the side

opening.

6. Connect the corresponding cables, such as power

cord, and network cable.

7. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

8. Adjust the tilt position [0° to 75°], the pan position

[0° to 355°], the rotation position [0° to 355°].

9. Install the bubble back to the camera.

10. Tighten screws on the bubble to finish the

installation.

Figure 2-3 Attach the Back Box

Figure 2-4 3-Axis Adjustment

Figure 2-5 Install the Bubble Back

Figure 2-6 Finish the Installation