HIKVISION TURBO HD DS-2CE5AC5T-AVPIT3Z 사용자 설명서 - 페이지 8

{카테고리_이름} HIKVISION TURBO HD DS-2CE5AC5T-AVPIT3Z에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD DS-2CE5AC5T-AVPIT3Z 16 페이지. Dome & turret camera

페이지 인쇄

Figure 2-10 Install the Turret Camera

7. Tighten the screws with the screw driver.

8. Connect the corresponding cables, such as power

cord, and video cable.

9. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

1). Hold the camera body and rotate the enclosure

to adjust the pan position [0° to 360°].

2). Move the camera body up and down to adjust

the tilt position [0° to 75°].

3). Rotate the camera body to adjust the rotation

position [0° to 360°].

2.3 Ceiling Mounting of Type III Camera

Steps:

1. Disassemble the turret camera by rotating the

camera to align the notch to one of the marks, as

shown in the figure below.

Figure 2-12 Disassemble the Camera

2. Remove the mounting base from the camera body

with a flat object, e.g., a coin.

3. Paste the drill template (supplied) to the place

where you want to install the camera.

4. Drill the screw holes and the cable hole (optional)

on the ceiling according to the drill template.

Cable Hole

Figure 2-11 3-axis Adjustment

Figure 2-13 Drill Template

Screw Hole