Green Power GNLS05T-1020H 소유자 매뉴얼 - 페이지 3
{카테고리_이름} Green Power GNLS05T-1020H에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Green Power GNLS05T-1020H 14 페이지. 5 ton log splitter
페이지 인쇄EXTENSION CORDS
Improper use of extension cords may cause inefficient operation
of the log splitter which can result in overheating. Be sure the
extension cord is no longer than 33feet and its section is no less
2
than 2.5mm
to allow sufficient current flow to the motor.
Avoid use of free and inadequately insulated connections.
Connections must be made with protected material suitable for
outdoor use.
AVOID ELECTRICAL SHOCK
Check that the electric circuit is adequately protected and that it
corresponds with the power, voltage and frequency of the motor.
Check that there is a ground connection, and a regulation
differential switch upstream.
Ground the log splitter. Prevent body contact with grounded
surfaces: pipes, radiators, ranges, and refrigerator enclosures.
Never open the pushbutton box on the motor. Should this be
necessary, contact a qualified electrician.
Mark sure your fingers do not touch the plug's metal prongs
when plugging or unplugging the log splitter.
KEEP VISITORS AND CHILDREN AWAY
The log splitter must be always operated by one person only.
Other people should keep a safe distance from the work area,
especially when the log splitter is under operations. Never use
another people to help you with freeing jammed log.
INSPECT YOUR LOG
Make sure there are no nails or foreign objects in logs to be split.
The ends of the logs must be cut square. Branches must be cut
of flush with the trunk.
DON'T OVERREACH
Floor must not be slippery.
Keep proper footing and balance at all times.
Never stand on log splitter. Serious injury could occur if the tool is
tipped or if the cutting tools is unintentionally contacted. Do not
store anything above or near the log splitter where anyone might
stand on the tool to reach them.
AVOID INJURY FROM UNEXPECTED ACCIDENT
Always pay full attention to the movement of the log pusher.
Do not attempt to load the log on until the log pusher has
stopped.
Keep hands out of the way of all moving parts.
3