KitchenAid KD-21A SERIES 설치 지침 매뉴얼 - 페이지 6
{카테고리_이름} KitchenAid KD-21A SERIES에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KD-21A SERIES 16 페이지.
페이지 인쇄2
PREPARING THE LOCATION
Access holes in the cabinets, floor, or rear wall for the hot water supply line, drain line, and electrical supply must
be located within the shaded area in Fig. 3 in order to avoid interference
with the dishwasher
frame or other
components.
HOT WATER SUPPLY LINE
WARNING:
PLUMBING
CONNECTIONS
MUST COMPLY
WITH APPLICABLE
SANITARY,
SAFETY,
AND
PLUMBING
CODES.
Water supply should be 140°F or lower depending
on model (refer to Use and Care Guide).
The hot water supply line should be l/2" OD copper tubing or 3/g" galvanized
pipe. The dishwasher
fill valve has
a 3/B" NPT female connection.
After determining
where the water supply line will enter the dishwasher
opening, drill a 1" access hole and run
the line to the approximate
fill valve location as shown in Fig. 4.
-6-