KitchenAid KD-21A SERIES Інструкція з монтажу Посібник з монтажу - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Посудомийна машина KitchenAid KD-21A SERIES. KitchenAid KD-21A SERIES 16 сторінок.
Друкувати сторінку2
PREPARING THE LOCATION
Access holes in the cabinets, floor, or rear wall for the hot water supply line, drain line, and electrical supply must
be located within the shaded area in Fig. 3 in order to avoid interference
with the dishwasher
frame or other
components.
HOT WATER SUPPLY LINE
WARNING:
PLUMBING
CONNECTIONS
MUST COMPLY
WITH APPLICABLE
SANITARY,
SAFETY,
AND
PLUMBING
CODES.
Water supply should be 140°F or lower depending
on model (refer to Use and Care Guide).
The hot water supply line should be l/2" OD copper tubing or 3/g" galvanized
pipe. The dishwasher
fill valve has
a 3/B" NPT female connection.
After determining
where the water supply line will enter the dishwasher
opening, drill a 1" access hole and run
the line to the approximate
fill valve location as shown in Fig. 4.
-6-