GREEN POWERLINK M9PC020000 사용자 설명서 - 페이지 13

{카테고리_이름} GREEN POWERLINK M9PC020000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GREEN POWERLINK M9PC020000 17 페이지. On-line energy management solution

Change User ID and Password

1. Click on "User" in the energy gateway operating page.

2. Change the User ID to your preference.

3. Enter your new password and confirm the new password.

4. Click on "Apply" to perform User ID and Password change.

The network setting allows the user to setup network as static IP or DHCP mode.

1. Click on "Network" in the energy gateway operating page.

2. According to your network environment, select Static IP or DHCP as your option.

3. Enter the network IP information.

4. Click on "Apply" to perform network setup.

GREEN POWERLINK On-Line Energy Management Solution V1.0

In the event your local utility uses a tariff calculation other than flat electricity

rate, please key in the average rate that most nearly resembles your utility's

tariff schedule.

Carbon dioxide is emitted in the process of producing electricity by burning coal

& fossil fuel. This is usually referred to CO2 footprint or carbon emission, which

in turn has contributed global warming and caused abnormal weather.

The average carbon emission rate is 0.49Kg (1.08 lbs) of carbon emission for

every 1 KWH of electricity produced. This can be changed depending upon your

local electric utility. Please contact your local utility for carbon emission rate.

1. Click on "Cost & CO2" in the energy gateway operating page.

2. According to your local utility electricity and carbon emission rate, enter the

information in the columns.

3. Click on "Apply" to perform Cost & CO2 setup.

GREEN POWERLINK On-Line Energy Management Solution V1.0