GREEN POWERLINK M9PC020000 사용자 설명서 - 페이지 14

{카테고리_이름} GREEN POWERLINK M9PC020000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GREEN POWERLINK M9PC020000 17 페이지. On-line energy management solution

Outgoing Server Setup

The energy gateway can collect energy database and transmit onto designated

server for energy management service.

1. Click on "Server" in the energy gateway operating page.

2. Enter the designated server information and transmission time interval.

3. Click on "Apply" to perform confirm server setting setup.

There are two ways to reset the energy gateway to factory default, please follow

the instruction below to reset the gateway to its factory default setting.

Warning:

By performing resetting the gateway to factory default, all saved data,

network settings & channel settings will be restored to factory default.

Reset to factory default from the energy gateway

1. Locate the reset point on the gateway.

2. Push a stylus or pen into the reset point for 5 seconds.

3. The gateway will be hard reset to factory default setting. Please perform all the

necessary setup and channel setting.

GREEN POWERLINK On-Line Energy Management Solution V1.0

1. Click on the "Defaults" in the energy gateway operation page.

2. Clink on the "Apply" to reset to factory default.

3. The gateway will be hard reset to factory default setting. Please perform all the

necessary setup and channel setting.

Anywhere and anytime, user can browse energy consumption

of the connected appliances and control power

on/off from internet.

Smart Socket

2-Way RF

Gateway

GREEN POWERLINK On-Line Energy Management Solution V1.0

Access the gateway

from internet

Internet

Router w/NAT

Internet

Service

Provider