HIKVISION TURBO HD U7T Series 사용자 설명서 - 페이지 6

{카테고리_이름} HIKVISION TURBO HD U7T Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD U7T Series 15 페이지. Turret & dome camera
HIKVISION TURBO HD U7T Series에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지), 사용자 설명서 (15 페이지)

페이지 인쇄

Figure 2-2 Attach the Back Box/Base Plate

Note:

The supplied screw package contains self-tapping



screws, and expansion bolts.

For cement ceiling, expansion bolts are required to



fix the camera. For wooden ceiling, self-tapping

screws are required.

5. Route the cables through the cable hole, or the side

opening.

6. Align the camera with the back box/base plate, and

tighten the screws to secure the camera with the back

box/base plate.

Figure 2-3 Fix the camera to the Ceiling

7. Connect the corresponding cables, such as power cord

and video cable.

8. Power on the camera to check whether the image on

the monitor is gotten from the optimum angle. If not,

adjust the camera according to the figure below to get

an optimum angle.

9. Fit the black liner back to the camera and tighten the

screws on the bubble of the dome camera to finish

the installation.

0° to 75°

Figure 2-4 3-Axis Adjustment

0° to 355°