HIKVISION TURBO HD U7T Series Руководство пользователя - Страница 6
Просмотреть онлайн или скачать pdf Руководство пользователя для Камера безопасности HIKVISION TURBO HD U7T Series. HIKVISION TURBO HD U7T Series 15 страниц. Turret & dome camera
Также для HIKVISION TURBO HD U7T Series: Руководство пользователя (15 страниц), Руководство пользователя (15 страниц)
Печатать страницу
Figure 2-2 Attach the Back Box/Base Plate
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement ceiling, expansion bolts are required to
fix the camera. For wooden ceiling, self-tapping
screws are required.
5. Route the cables through the cable hole, or the side
opening.
6. Align the camera with the back box/base plate, and
tighten the screws to secure the camera with the back
box/base plate.
Figure 2-3 Fix the camera to the Ceiling
7. Connect the corresponding cables, such as power cord
and video cable.
8. Power on the camera to check whether the image on
the monitor is gotten from the optimum angle. If not,
adjust the camera according to the figure below to get
an optimum angle.
9. Fit the black liner back to the camera and tighten the
screws on the bubble of the dome camera to finish
the installation.
0° to 75°
Figure 2-4 3-Axis Adjustment
0° to 355°
0° to 355°