Ganz ZN-DNT352XE-MIR 빠른 사용 설명서 - 페이지 3
{카테고리_이름} Ganz ZN-DNT352XE-MIR에 대한 빠른 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ganz ZN-DNT352XE-MIR 8 페이지.
Step3. Set the lens position
1) Remove the dome cover.
2) Set the lens position by rotating the camera gimbal; to pan, rotate the reinforced lower body of the
gimbal; to tilt, vertically adjust the camera gimbal.
A. To adjust lens position,
rotate the camera gimbal
!
Refrain from continuously rotating the camera gimbal with excessive force to a single direction
as it is attached with the IR‐LED cable inside the dome.
Caution
3) The figure and table below explains the lens switch settings.
NC3502 Ver1.3
B. To pan, rotate the lower
body of the camera gimbal
SW1
PAL/NTSC
SW4
FAR
3
C. Tilt the lens by vertically
adjusting the camera gimbal
SW2
SW3
TELE
WIDE
SW5
SW6
Auto‐
NEAR
Focus