Avantco UBB2472G 사용자 설명서 - 페이지 3

{카테고리_이름} Avantco UBB2472G에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantco UBB2472G 5 페이지. Back bar refrigerator
Avantco UBB2472G에 대해서도 마찬가지입니다: 사용자 설명서 (6 페이지)

페이지 인쇄

Electrical

• Please ensure that the required voltage is being supplied at all times.

• The unit should be plugged into a grounded and properly-sized electrical outlet with appropriate

over-current protection. NEVER USE AN ADAPTER PLUG! Please refer to the electrical

requirements on the unit's nameplate.

• The unit should have its own dedicated outlet.

• Do not use extension cords.

• Do not unplug your cooler by pulling on the power cord. Grip the plug firmly and pull straight out

from the outlet.

• Ensure the unit is not resting on or against the electrical cord.

• If the unit is not in use for a long period of time, please unplug the unit from the outlet.

• To avoid shock and fire hazards, do not plug in or unplug the unit with wet hands.

• After unplugging the unit, wait at least 10 minutes before plugging it back in. Failure to do so could

cause damage to the compressor.

• If the power cuts off, wait at least 5 minutes before turning the unit on to avoid damage to the

compressor.

Temperature Controls

• Refrigerant LED - Compressor is on

• Fan LED - Fan is on

• Defrost LED - Defrost cycle is running

Functions

Set Temperature

Refrigerators are preset at the factory to run between 33 and 41 degrees Fahrenheit.

1) Press SET button

2) Press UP or DOWN buttons to adjust

3) Press SET button to set

NOTE: All other temperature control functions should only be used by an authorized service technician.

User Manual

- 3 -