Avantco UBB2472G Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Lodówka Avantco UBB2472G. Avantco UBB2472G 5 stron. Back bar refrigerator
Również dla Avantco UBB2472G: Podręcznik użytkownika (6 strony)

Drukuj stronę
Avantco UBB2472G Podręcznik użytkownika
Electrical
• Please ensure that the required voltage is being supplied at all times.
• The unit should be plugged into a grounded and properly-sized electrical outlet with appropriate
over-current protection. NEVER USE AN ADAPTER PLUG! Please refer to the electrical
requirements on the unit's nameplate.
• The unit should have its own dedicated outlet.
• Do not use extension cords.
• Do not unplug your cooler by pulling on the power cord. Grip the plug firmly and pull straight out
from the outlet.
• Ensure the unit is not resting on or against the electrical cord.
• If the unit is not in use for a long period of time, please unplug the unit from the outlet.
• To avoid shock and fire hazards, do not plug in or unplug the unit with wet hands.
• After unplugging the unit, wait at least 10 minutes before plugging it back in. Failure to do so could
cause damage to the compressor.
• If the power cuts off, wait at least 5 minutes before turning the unit on to avoid damage to the
compressor.

Temperature Controls

• Refrigerant LED - Compressor is on
• Fan LED - Fan is on
• Defrost LED - Defrost cycle is running
Functions
Set Temperature
Refrigerators are preset at the factory to run between 33 and 41 degrees Fahrenheit.
1) Press SET button
2) Press UP or DOWN buttons to adjust
3) Press SET button to set
NOTE: All other temperature control functions should only be used by an authorized service technician.
User Manual
- 3 -