GREEN SERIES FITNESS CIR-TM7000E-G 절차 - 페이지 2

{카테고리_이름} GREEN SERIES FITNESS CIR-TM7000E-G에 대한 절차을 온라인으로 검색하거나 PDF를 다운로드하세요. GREEN SERIES FITNESS CIR-TM7000E-G 3 페이지. Suspension upgrade procedure
GREEN SERIES FITNESS CIR-TM7000E-G에 대해서도 마찬가지입니다: 업그레이드 절차 (20 페이지)

Step 1
- Unplug the power cord from the wall and from the treadmill base unit. #1 Phillips screw driver needed for screw
holding power cord to treadmill frame with metal sure connect. Place metal sure connect and small screw in a
small container ie. Soup Bowl.
Step 2
– Take six screws off the treadmill hood to the frame with a #2 Phillips screw driver and put in a small container
ie. soup bowl.
Step 3
– Slide the left and the right hood/rail cover halfway up the rails and secured using the rubber grommets half up
/ half down so they won't slide down.
www.GreenSeriesFitness.com
©May 2015
Call Toll free at (800) 269-7130
CIR-TM7000E-G Revision 1.1
2