GREEN SERIES FITNESS CIR-TM7000E-G Процедура - Сторінка 2

Переглянути онлайн або завантажити pdf Процедура для Бігова доріжка GREEN SERIES FITNESS CIR-TM7000E-G. GREEN SERIES FITNESS CIR-TM7000E-G 3 сторінки. Suspension upgrade procedure
Також для GREEN SERIES FITNESS CIR-TM7000E-G: Процедура оновлення (20 сторінок)

Друкувати сторінку

Step 1

- Unplug the power cord from the wall and from the treadmill base unit. #1 Phillips screw driver needed for screw

holding power cord to treadmill frame with metal sure connect. Place metal sure connect and small screw in a

small container ie. Soup Bowl.

Step 2

– Take six screws off the treadmill hood to the frame with a #2 Phillips screw driver and put in a small container

ie. soup bowl.

Step 3

– Slide the left and the right hood/rail cover halfway up the rails and secured using the rubber grommets half up

/ half down so they won't slide down.

www.GreenSeriesFitness.com

©May 2015

Call Toll free at (800) 269-7130

CIR-TM7000E-G Revision 1.1