GREEN SERIES FITNESS CIR-TM7000E-G 업그레이드 절차 - 페이지 10
{카테고리_이름} GREEN SERIES FITNESS CIR-TM7000E-G에 대한 업그레이드 절차을 온라인으로 검색하거나 PDF를 다운로드하세요. GREEN SERIES FITNESS CIR-TM7000E-G 20 페이지. Suspension upgrade procedure
GREEN SERIES FITNESS CIR-TM7000E-G에 대해서도 마찬가지입니다: 절차 (3 페이지)
페이지 인쇄2.12.
After completing step 2.11, reattach the 8mm x 40mm Philips head bolt back into front row #1
suspension with clip. Tighten to estimated 20 lbs of torque. Note: Make sure to use blue Loctite on
end of bolts.
2.13.
Go to rear of treadmill and take off both LT & RT rear deck Philips head 8mm x 30mm bolts. Pry
up the deck without damage at least 1" and secure with item like plastic or rubber handle wrench.
CAUTION: INJURY TO FINGERS AT THIS POINT WHEN NOT BEING CAREFULL.
www.GreenSeriesFitness.com
©December 2014
Call Toll free at (800) 269-7130
10