HIKVISION DS-2CE12UF3T-E 사용자 설명서 - 페이지 8

{카테고리_이름} HIKVISION DS-2CE12UF3T-E에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-2CE12UF3T-E 18 페이지. 4k colorvu poc camera
HIKVISION DS-2CE12UF3T-E에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (17 페이지)

페이지 인쇄

disassemble the camera for repair or maintenance by

yourself.

2.1

Installation of Type I Camera

2.1.1 Ceiling/Wall Mounting Without Junction Box

Before you start:

Ceiling mounting and wall mounting are similar.

Following steps take ceiling mounting as an example.

Steps:

1. Paste the drill template (supplied) to the place

where you want to install the camera.

2. (Optional) For cement ceiling, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

3. (Optional) Drill the cable hole, when the cables are

routed through the ceiling.

4. Align the screw holes in the bracket to the ceiling,

and secure the camera with three PA4 × 25 screws

(supplied).

Figure 2-2 Secure Camera to Ceiling

5. Connect the power cord and video cable.

6. Power on the camera to adjust the view angle

according to the figure below.

Rotation Position

[0° to 360°]

Loosen the trim ring to adjust the pan position

1).

[0° to 360°].

Loosen the thumbscrew to adjust the tilt

2).

position [0° to 180°].

Loosen the screw to adjust the rotation position

3).

[0° to 360°].

7. Tighten the trim ring and screws to finish the

installation.

2.1.2 Ceiling/Wall Mounting with Junction Box

Before you start:

Cable

Hole

Figure 2-1 Drill Template

Figure 2-3 3-Axis Adjustment

Screw Ho le

template

Pan Position

[0° to 360°]

Trim Ring

Tilt Position

[0° to 180°]

Thumbscrew

Screw