HIKVISION DS-2CE18U8T-IT3 사용자 설명서 - 페이지 7

{카테고리_이름} HIKVISION DS-2CE18U8T-IT3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-2CE18U8T-IT3 14 페이지. Turbohd 4k series bullet camera
HIKVISION DS-2CE18U8T-IT3에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지), 빠른 시작 매뉴얼 (17 페이지)

페이지 인쇄

1. User Manual

7. Route the cables through the bottom cable hole

(optional), or the side cable hole of the junction

box.

8. Combine the junction box cover with its body.

9. Repeat the step 5 and 6 of 2.1.1 Ceiling/Wall

Mounting without Junction Box to complete the

installation.

2.2 Installation of Type II Camera

2.2.1 Ceiling/Wall Mounting without Junction Box

Steps:

1. Paste the drill template (supplied) to the place

where you want to install the camera.

2. Drill the screw holes according to the drill template,

and the cable hole (optional) on the ceiling/wall.

Note:

Drill the cable hole in the center of the drill template,

when adopting ceiling outlet to route the cable.

3. Route the cables through the cable hole (optional)

or the side opening.

4. Fix the camera to the ceiling with supplied screws.

Figure 2-6 Fix the Junction Box to the

Figure 2-7 Fix the Junction Box Cover back

Figure 2-8 Drill Template

Wall/Ceiling

to its Body