HIKVISION DS-2CE19U8T-IT3Z 빠른 시작 매뉴얼 - 페이지 10

{카테고리_이름} HIKVISION DS-2CE19U8T-IT3Z에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-2CE19U8T-IT3Z 17 페이지. Turbo hd 4k series vf bullet & turret & dome camera
HIKVISION DS-2CE19U8T-IT3Z에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)

페이지 인쇄
HIKVISION DS-2CE19U8T-IT3Z 빠른 시작 매뉴얼
3.5 User Logout, Shutdown and Reboot
Purpose
You can log out of the system, shut down, or reboot the device on your demands.
Step 1 Go to Menu > Shutdown.
Step 2 Click Logout, Shutdown, or Reboot.
After you have logged out of the system, menu
operation on the screen is invalid. It is required to enter
a user name and password to unlock the system.

3.6 Viewing Signal Input Status

Purpose
The analog signal inputs (Turbo HD, AHD, HDCVI, CVBS) and IP signal input can be recognized and connected
automatically. For some series of DVR, you can configure 5 MP long distance transmission on the Signal Input
Status interface. For other models, there is no Signal Input Status interface.
The following steps are about 5 MP long distance transmission configuration for the supported DVR.
Step 1 Go to Menu > Camera > Signal Input Status.
Step 2 Click
to enter the 5 MP Long Distance
Transmission Settings interface.
Step 3 Check the channel(s) to enable 5 MP long
distance transmission.
Step 4 Click Apply to save the settings and OK to
return to the Signal Input Status interface.
Digital Video Recorder Quick Start Guide
Figure 3-5 Signal Input Status
Figure 3-6 5 MP Long Distance Transmission Settings
9
Figure 3-4 Logout