HIKVISION DS-2CE19U8T-IT3Z 빠른 시작 매뉴얼 - 페이지 11

{카테고리_이름} HIKVISION DS-2CE19U8T-IT3Z에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-2CE19U8T-IT3Z 17 페이지. Turbo hd 4k series vf bullet & turret & dome camera
HIKVISION DS-2CE19U8T-IT3Z에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)

페이지 인쇄

3.7 Adding IP Cameras

Purpose

Before you can get live video or record the video files, you should add the network cameras to the connection

list of the device.

Before you start

Ensure the network connection is valid and correct, and the IP camera to add has already been activated. Please

refer to the User Manual for activating the inactive IP camera.

Step 1 Go to Menu > Camera > IP Camera.

Step 2 Select the IP camera from the list and

click

to add the camera (with the

same admin password of the DVR's).

Step 3 (Optional) Check Enable H.265 (For

Initial Access) for the connected IP

camera supporting H.265. Then the IP

camera will be encoded with H.265.

3.8 Connecting PoC Cameras

Purpose

Some models support PoC (Power over Coaxitron) cameras connection. DVR will detect the connected PoC

cameras automatically, manage the power consumption via the coaxial communication, and provide power to

the cameras via coaxitron.

Before you start

Connect the PoC camera to the DVR.

Step 1 Go to Menu > Camera > PoC Information.

Step 2 Check the status of connected PoC camera.

When the PoC camera is connected to the DVR, the default status is AF.

: If the connected PoC camera supports AT mode and the power of the DVR PoC module is

enough, the DVR will switch the default AF mode to AT mode.

Digital Video Recorder Quick Start Guide

Figure 3-8 PoC Information

Figure 3-7 Add IP Camera