HIKVISION DS-2CE56D8T-IT3E 사용자 설명서 - 페이지 6
{카테고리_이름} HIKVISION DS-2CE56D8T-IT3E에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-2CE56D8T-IT3E 17 페이지. Bullet & turret camera
HIKVISION DS-2CE56D8T-IT3E에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지), 빠른 시작 매뉴얼 (17 페이지)
페이지 인쇄
1.2.5 Overview of Type V Camera
Enclosure
Main Body
Mounting Base
Figure 1-5 Overview of Type V Camera
1.2.6 Overview of Type VI Camera
Trim Ring
Power Cord
Figure 1-6 Overview of Type VI Camera
2 Installation
Before you start
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with
your power output to avoid the damage.
Make sure the wall is strong enough to withstand
three times the weight of the camera, and the
mount.
If the wall is cement, insert expansion bolts before
installing the camera. If the wall is wooden, use
self-tapping screws to secure the camera.
If the product does not function properly, contact
your dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.
2.1 Installation of Type I/Type II/Type III Camera
2.1.1 Ceiling/Wall Mounting
Before you start:
The installation steps of Type I, Type II, and Type III
Camera are similar and the following takes Type I as an
example to describe the steps.
Steps:
1. Paste the drill template (supplied) to the place
where you want to install the camera.
2. Drill the screw holes on the ceiling/wall according to
the drill template.
Video Cable
Power Cord
IN
DC12V
Video Cable
Clip Plate
Mounting Base
Enclosure
Main Body