HIKVISION DS-2CE71D8T-PIRL 사용자 설명서 - 페이지 12
{카테고리_이름} HIKVISION DS-2CE71D8T-PIRL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-2CE71D8T-PIRL 15 페이지. Turret camera
HIKVISION DS-2CE71D8T-PIRL에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지), 빠른 시작 매뉴얼 (17 페이지)
페이지 인쇄
IR LIGHT
You can turn on/off the infrared to meet the
requirements of different circumstances.
SMART IR
The Smart IR function is used to adjust the light to its
most suitable intensity, and prevent the image from
over exposure. You can choose MODE 1 or MODE 2.
MODE 1 could reach the most ideal effects of the low
illumination, but it might cause a delay by contrast with
the actual scenario. MODE 2 represents the normal
mode. The SMART IR value can be adjusted from 0 to 3.
The higher the value is, the more obvious effects are.
D-N THRESHOLD ((Day to Night Threshold))
Day to Night Threshold is used to control the sensitivity
of switching the day mode to the night mode. You can
set the value from 1 to 9. The larger the value is, the
more sensitive the camera is.
N-D THRESHOLD (Night to Day Threshold)
Night to Day Threshold is used to control the sensitivity
of switching the night mode to the day mode. You can
set the value from 1 to 9. The larger the value is, the
more sensitive the camera is.
3.4 VIDEO SETTINGS
Move the cursor to VIDEO SETTINGS and click Iris+ to
enter the submenu. WHITE BALANCE, BRIGTHMESS,
CONTRAST, SHARPNESS, SATURATION, 3 DNR, and
MIRROR are adjustable.
IMAGE MODE
IMAGE MODE is used to adjust the image saturation,
and you can set it as STD (Standard), or HIGH-SAT (High
Saturation).
Figure 3-3 DAY NIGHT
VIDEO SETTINGS
IMAGE MODE
WHITE BALANCE
BRIGHTNESS
CONTRAST
SHARPNESS
SATURATION
3DNR
MIRROR
BACK
EXIT
SAVE & EXIT
Figure 3-4 VIDEO SETTING
STD
5
5
5
5
5
OFF