HIKVISION DS-2CE71D8T-PIRL 사용자 설명서 - 페이지 14

{카테고리_이름} HIKVISION DS-2CE71D8T-PIRL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-2CE71D8T-PIRL 15 페이지. Turret camera
HIKVISION DS-2CE71D8T-PIRL에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지), 빠른 시작 매뉴얼 (17 페이지)

페이지 인쇄

Figure 3-6 FUNCTIONS

 SOLID

Select the ALARM MODE as SOLID. In this way, the

white light source turns on, when the PIR module

received the alarm signal.

 FLASHING

Select the ALARM MODE as FLASHING. In this way, the

white light source flashes when the PIR module

received the alarm signal.

Note:

When the WHITE LIGHT is selected as AUTO, you can

only select the ALARM MODE as FLASHING.

TIME SETTINGS

In the TIME SETTINGS you can set the time as 5 s, 10 s,

15 s, 30 s, or 60 s, which means that the solid mode

stays for the set time when the camera received one

alarm signal.

Note:

The solid mode will be stayed for another set time

when second alarm signal is received, and the rest can

be done in the same way.

PIR LEVEL

Adjust the sensitivity of the PIR module, and the higher

the value is, the more sensitive the PIR module is.

PIR DET MODE

OUTDOOR and INDOOR are selectable for PIR DET

MODE switch.

MOTION DET

You can turn on/off the MOTION DET to meet different

circumstances.

PRIVACY

You can turn on/off the PRIVACY to meet different

circumstances.

3.6 FACTORY DEFAULT

Reset all the settings to the factory default.

3.7 EXIT

Move the cursor to EXIT and click Iris+ to exit the menu.

3.8 SAVE & EXIT

Move the cursor to SAVE & EXIT and click Iris+ to save

the settings, and exit the menu.

UD12338B-A