HIKVISION DS-2CE72HFT-F28 사용자 설명서 - 페이지 10
{카테고리_이름} HIKVISION DS-2CE72HFT-F28에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-2CE72HFT-F28 17 페이지. 5 mp full time color camera
HIKVISION DS-2CE72HFT-F28에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지), 빠른 시작 매뉴얼 (17 페이지)
페이지 인쇄
3. Paste the drill template (supplied) to the place
where you want to install the camera.
4. Drill the screw holes and the cable hole (optional)
according to the drill template.
Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable.
5. Attach the mounting base to the ceiling and secure
it with supplied screws. For cement ceiling, you
need to install the expansion bolts at first.
Figure 2-14 Attach the Mounting Base to the Ceiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
6. Route the cables through the cable hole, or the side
opening.
7. Install the camera back to the mounting base and
secure it.
Figure 2-15 Install the Camera Back
8. Connect the corresponding cables, such as power
cord, and video cable.
9. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
Pan Position
[0° to 360°]
1). Rotate the enclosure to adjust the pan position
[0° to 360°].
Figure 2-13 Drill Template
Expansion Bolts
Tilt Position
[0° to 75°]
Figure 2-16 3-Axis Adjustment
Screws
Rotation Position
[0° to 360°]