HIKVISION DS-2CE72HFT-F28 사용자 설명서 - 페이지 9
{카테고리_이름} HIKVISION DS-2CE72HFT-F28에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-2CE72HFT-F28 17 페이지. 5 mp full time color camera
HIKVISION DS-2CE72HFT-F28에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지), 빠른 시작 매뉴얼 (17 페이지)
페이지 인쇄
Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable.
3. Route the cables through the cable hole, or the side
opening.
4. Attach the bracket to the ceiling, and secure the
camera with supplied screws.
Figure 2-9 Secure the Camera to the Ceiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall/ceiling, expansion bolts are
required to fix the camera. For wooden
wall/ceiling, self-tapping screws are required.
5. Connect the corresponding power cord, and video
cable.
6. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, loosen the trim ring to adjust the position.
Rotation Position
[0° to 360°]
2.3 Installation of Type III Camera
2.3.1 Ceiling/Wall Mounting without Junction Box
Before you start:
The installation of ceiling mounting and wall mounting
are similar. Following takes ceiling mounting as an
example.
Steps:
1. Disassemble the camera by rotating the camera to
align the notch to one of the line, as shown in the
figure below.
Figure 2-11 Dissemble the Camera
2. Pry the mounting base by using a flat object, for
example, a coin.
Figure 2-12 Pry the Mounting Base
Figure 2-10 3-Axis Adjustment
Pan Position
[0° to 360°]
Notch
A Coin
Trim Ring
Tilt Position
[0° to 90°]