Avantco 178UDD1HCS 사용자 설명서 - 페이지 6
{카테고리_이름} Avantco 178UDD1HCS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantco 178UDD1HCS 19 페이지. Beer dispensers
Avantco 178UDD1HCS에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지), 사용자 설명서 (19 페이지)
페이지 인쇄
Cabinet Location Guidelines
•
Install the unit on strong and leveled surfaces.
- If the surface is uneven, the unit may be noisy.
- The unit may malfunction if the surface is uneven.
- Keep the cooler stable to avoid vibration and noise.
•
Install the unit in an indoor, well-ventilated area.
- For best performance, please maintain clearance of 3" on the back of the unit.
- Do not use outdoors. For indoor use only.
- Avoid direct sunlight.
- Unit should be placed far from any heating source to avoid decrease of refrigeration efficiency.
•
Avoid installation in a high humidity and/or dusty area.
- Humidity above 60% can cause the unit to rust, to collect condensation, and may decrease efficiency.
- Dust collected on condenser coil will cause unit to malfunction.
•
Select a location away from heat- and moisture-generating equipment.
- Ambient temperatures above 75 degrees Fahrenheit may cause the compressor to malfunction.
- For optimal performance, this unit should not be used in environments with ambient temperatures
exceeding 75 degrees Fahrenheit.
- The unit should not be placed in areas with an ambient temperature over 90 degrees Fahrenheit.
- Equipment malfunctions due to ambient temperatures above 90 degrees could void the warranty.
- Do not install this unit inside a closet or alcove.
•
For optimal performance, 3" of clearance is required around all louvered or vented panels, to allow for
proper air flow.
- Component failure due to improper installation is not covered under the warranty.
Shelf Installation
Shelves are included with the beer dispensers to provide the option for storage.
1.
Hook shelf clips onto hanger.
2. Place shelves on shelf clips making sure all corners are seated properly.
www.AvantcoRefrigeration.com
6
User Manual
Beer Dispensers