GREEN TOILET 120 Family 조립 및 사용 설명서 - 페이지 6

{카테고리_이름} GREEN TOILET 120 Family에 대한 조립 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GREEN TOILET 120 Family 12 페이지.

The openings for the seat tend to vary in outhouses – there is no standard. Usually this is

not a problem when assembling the Green Toilet. Just level the thermal seat, the opening

of the seat and the waste pipe in the front of the seat. Thus, the use of the toilet will be

clean and hygienic.

There is a thermal seat included in the Green Toilet package with separate installation

instructions.

Assembly of ventilation

The ventilation pipe should be led as straight as possible to the roof level. Usually, it is

assembled to the back of the outhouse wall with the metal holders, which can be bent for

ﬁxing to the wall. With the ﬂexible pipe, you can adjust where to ﬁx the pipe.

Also, a ventilation pipe hat is included, and it is placed to the top to prevent any rainfall. If

the outhouse roof is wide, it maybe necessary to make an inlet for the ventilation pipe

through the roof.

Hint! If you have to bend and make curves to the ventilation pipe,

it's a good idea to add a wind fan (an accessory) to the top of the

pipe to boost dehydration and ventilation.

When the place for the Green Toilet is ready and the ventilation duct ﬁxed, you can place

the Green Toilet container below the seat. Finally, attach the ﬂexible pipe, liquid hose and

the canister.

ASSEMBLY