HIKVISION DS-7104HQHI-F1/N 빠른 시작 매뉴얼 - 페이지 12

{카테고리_이름} HIKVISION DS-7104HQHI-F1/N에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-7104HQHI-F1/N 17 페이지. T710xqxtx series. turbohd dvr/camera kit

페이지 인쇄

1 2

S E T U P R E C O R D I N G ( c o n t i n u e d )



•

Substream







- Video Quality adjusts picture clarity (high setting = four green squares is default).

Consider highest if hard drive space allows. Medium setting is a balance between good

picture and saving HDD space.

- Frame Rate sets recording frame rate The system defaults to record video continuously

at maximum frame rate. Consider adjusting to 8 fps for continuous and 15 fps for event

recording for optimum recording. Higher frame rates require more storage, but allow

better slow motion playback.

- Max Bitrate Mode chooses between pre-set bitrate values and customized values

(General setting is default).

- Max Bitrate (kbps) is the chosen bitrate for streaming the video. Max Bitrate should be

adjusted to meet or exceed the rate recommended by the system for the chosen

parameters.

- Max Bitrate Recommended is impacted by resolution, quality, and frame rate.

- Record Audio turns on audio recording. Requires connection of external microphone or

camera with built-in mic.

- Video Stream determines which stream is recorded. Leave at default (Main Stream).

Go to RECORDING CONFIGURATION > RECORD QUALITY > SUBSTREAM to set up

the Sub Stream to stream to mobile devices and display multiple cameras locally.

NOTE:

If the upload speed is not sufficient, lower the frame rate, bitrate,

and or resolution for more fluent mobile viewing.

 RECORD (MAIN STREAM)

Select tab

 CAMERA

Select IP camera

 EVENT



For event recording only (motion

or alarm)

CONTINUOUS

For live view image and

continuous recording

VIDEO QUALITY

Select

to set quality (in example,

sensitivity is set to 3)

number of green squares

