HIKVISION DS-7104HQHI-F1/N Посібник із швидкого старту - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для ВІДЕОРЕЄСТРАТОР HIKVISION DS-7104HQHI-F1/N. HIKVISION DS-7104HQHI-F1/N 17 сторінок. T710xqxtx series. turbohd dvr/camera kit

HIKVISION DS-7104HQHI-F1/N Посібник із швидкого старту
1 2
S E T U P R E C O R D I N G ( c o n t i n u e d )

Substream
1.



- Video Quality adjusts picture clarity (high setting = four green squares is default).
Consider highest if hard drive space allows. Medium setting is a balance between good
picture and saving HDD space.
- Frame Rate sets recording frame rate The system defaults to record video continuously
at maximum frame rate. Consider adjusting to 8 fps for continuous and 15 fps for event
recording for optimum recording. Higher frame rates require more storage, but allow
better slow motion playback.
- Max Bitrate Mode chooses between pre-set bitrate values and customized values
(General setting is default).
- Max Bitrate (kbps) is the chosen bitrate for streaming the video. Max Bitrate should be
adjusted to meet or exceed the rate recommended by the system for the chosen
parameters.
- Max Bitrate Recommended is impacted by resolution, quality, and frame rate.
- Record Audio turns on audio recording. Requires connection of external microphone or
camera with built-in mic.
- Video Stream determines which stream is recorded. Leave at default (Main Stream).
Go to RECORDING CONFIGURATION > RECORD QUALITY > SUBSTREAM to set up
the Sub Stream to stream to mobile devices and display multiple cameras locally.
NOTE:
If the upload speed is not sufficient, lower the frame rate, bitrate,
and or resolution for more fluent mobile viewing.
 RECORD (MAIN STREAM)
Select tab
 CAMERA
Select IP camera
 EVENT

For event recording only (motion
or alarm)
CONTINUOUS
For live view image and
continuous recording
VIDEO QUALITY
Select
to set quality (in example,
sensitivity is set to 3)
number of green squares