GAPOSA XQ Sileo XS 50 매뉴얼 - 페이지 5

{카테고리_이름} GAPOSA XQ Sileo XS 50에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GAPOSA XQ Sileo XS 50 15 페이지. Tubular motors with encoder electronic limits
GAPOSA XQ Sileo XS 50에 대해서도 마찬가지입니다: 매뉴얼 (16 페이지)

페이지 인쇄
GAPOSA XQ Sileo XS 50 매뉴얼
INSTALLATION
The fixing bracket
3
frame so that the roller tube
height not less than 1,8m.
[FOR XQ50] Place the motor square pin
the cap at the opposite end of the tube on the fixing plate.
4
WARNING: Never hit on the head of the motor (D) when you
insert it into the tube.
NOTES
• For the XQ50, with torque up to 15Nm, the minimum tube diameter
is 50x1,5mm; for motors with higher torques, the minimum tube
diameter is 60x1,5mm.
• For the XQ60, the minimum tube diameter is 63x1,5mm.
WARNING:
• The screws used to fix the last slat on the tube may be too long
and reach the tubular part of the motor. Use appropriate screws or
fixing clips.
• Motor moving parts installed under 2,5m from the ground must be
protected.
• A wrong motor installation can damage persons or objects.
must be fixed inside the box or on the awning
9 0 °
F
is perfectly horizontal and at a
on the bracket
2/2
and
D
C